| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| HLT151DL-6-5 | SPS TECHNOLOGIES LLC | 6725 | 3 | 2 | 5 | ||||
| HLT151DL-6-5 | SPS TECHNOLOGIES LLC | 6950 | 3 | 2 | 5 | ||||
| HP4812-3-5 | SPS TECHNOLOGIES LLC | 0ZC92 | 3 | 2 | 5 | ||||
| HLT151DL-6-5 | SPS TECHNOLOGIES LLC | 17446 | 3 | 2 | 5 | ||||
| HLT151TB-6-5 | SPS TECHNOLOGIES LLC | 6725 | 5 | 2 | 5 | ||||
| HLT151TB-6-5 | SPS TECHNOLOGIES LLC | 6950 | 5 | 2 | 5 | ||||
| HLT151TB-6-5 | SPS TECHNOLOGIES LLC | 17446 | 5 | 2 | 5 | ||||
| HLT151TB-6-5 | SPS TECHNOLOGIES LLC | 56878 | 5 | 2 | 5 | ||||
| HLT151TB-6-5 | SPS TECHNOLOGIES LLC | 60516 | 5 | 2 | 5 | ||||
| HLT151TB-6-5 | SPS TECHNOLOGIES LLC | 73197 | 5 | 2 | 5 | ||||
| HLT151TB-6-5 | SPS TECHNOLOGIES LLC | L4528 | 5 | 2 | 5 | ||||
| HLT151DL-6-5 | SPS TECHNOLOGIES LLC | 60516 | 3 | 2 | 5 | ||||
| HLT151DL-6-5 | SPS TECHNOLOGIES LLC | 73197 | 3 | 2 | 5 | ||||
| HLT151DL-6-5 | SPS TECHNOLOGIES LLC | L4528 | 3 | 2 | 5 | ||||
| HLT151DL-6-5 | SPS TECHNOLOGIES LLC | 56878 | 3 | 2 | 5 | ||||
| ST3M812-3-5 | SPS TECHNOLOGIES LLC | 76301 | 7 | 2 | 5 | ||||
| MA4812-3-5 | SPS TECHNOLOGIES LLC | 58845 | 5 | 9 | 5 | ||||
| HLT151TB-6-5 | SPS TECHNOLOGIES LLC | 92215 | 5 | 9 | 5 | ||||
| HLT151TB-6-5 | SPS TECHNOLOGIES LLC | 97928 | 5 | 9 | 5 | ||||
| HLT151DL-6-5 | SPS TECHNOLOGIES LLC | 92215 | 5 | 9 | 5 | ||||
| HLT151DL-6-5 | SPS TECHNOLOGIES LLC | 97928 | 5 | 9 | 5 | ||||
| 10112235 | SPS TECHNOLOGIES LLC | A486G | 6 | 9 | 5 | ||||
| AIC-L-762-3-5 | SPS TECHNOLOGIES LLC | 6725 | 5 | 9 | 5 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| AASB | FASTENER LENGTH | 0.662 INCHES MINIMUM AND 0.682 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.317 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.0394 INCHES MINIMUM AND 0.0415 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.3016 INCHES MAXIMUM |
| AASK | HEAD STYLE | COUNTERSUNK W/REVERSE CHAMFER |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAZE | SHANK DIAMETER | 0.2021 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| CQSX | SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AATB | WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
