| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.537 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.357 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-N-281 FED SPEC ALL MATERIAL RESPONSES SLEEVE |
| MATT |
MATERIAL |
IRON ALLOY 660 OR NICKEL ALLOY 400 OR NICKEL ALLOY R-405 LOCKING RING |
| MATT |
MATERIAL |
IRON ALLOY 660 STEM |
| MATT |
MATERIAL |
NICKEL ALLOY 400 OR NICKEL ALLOY R-405 SLEEVE |
| ABAJ |
LUBRICATION |
DRY FILM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5737 ASSN STD 1ST MATERIAL RESPONSE OR QQ-N-281 FED SPEC 2ND MATERIAL RESPONSE OR QQ-N-281 FED SPEC 3RD MATERIAL RESPONSE LOCKING RING |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5737 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| AAZE |
SHANK DIAMETER |
0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQSX |
SHEAR STRENGTH |
1090 SINGLE POUNDS PER SQUARE INCH |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1921 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE LOCKING RING |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE LOCKING RING |
| SFTT |
SURFACE TREATMENT |
PASSIVATE STEM |
