| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
THREADED STEM |
| ANEE |
GRIP LENGTH |
0.407 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM BOLT AND 46.0 ROCKWELL C MAXIMUM BOLT39.0 ROCKWELL C MINIMUM NUT AND 46.0 ROCKWELL C MAXIMUM NUT |
| AAZG |
HEAD MAJOR DIAMETER |
0.3898 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE BOLT OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE BOLT OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE BOLTMIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE NUT OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE NUT OR MIL-S-6049 |
| MATT |
MATERIAL |
STEEL COMP 4130 BOLT OR STEEL COMP 4140 BOLT OR STEEL COMP 8740 BOLTSTEEL COMP 4130 NUT OR STEEL COMP 4140 NUT OR STEEL COMP 8740 NUTSTEEL COMP 303 SLEEVE OR STEEL COMP 304 SLEEVE |
| ABAJ |
LUBRICATION |
WAX AND CETYL ALCOHOL AND SOLID FILM |
| AAZE |
SHANK DIAMETER |
0.2841 INCHES MINIMUM AND 0.2851 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLTQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUTMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE AND QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM BOLT AND CHROMATE BOLTCADMIUM NUT AND CHROMATE NUTPASSIVATE SLEEVE AND CADMIUM SLEEVE |
