| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| AASB |
FASTENER LENGTH |
0.885 INCHES MINIMUM AND 0.905 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.5018 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM |
| HEAT |
HEAT TREATMENT |
T-6 SOLUTION HEAT TREATED OVERALL |
| AASK |
HEAD STYLE |
FLUSH COUNTERSUNK |
| AAPC |
IDENTIFICATION CODE COLOR |
NATURAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
2950 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL |
| AAZE |
SHANK DIAMETER |
0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CQSX |
SHEAR STRENGTH |
4500 DOUBLE POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
RIVET ATTACHMENT IS DESIGNED FOR USE IN APPLICATIONS WHERE FIBERGLASS E-GLASS OR KEVLAR SOLID LAMINATE ARE ATTACHED TO ALLUMINUM SUBSTRUCTURE. ARE RESTRICTED IN USE ON SOLID METALLIC JOINTS. |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
88277-3D0086 MANUFACTURERS STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
