| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
W/S:AIRCRAFT, STRATOLIFTER C-135 HELICOPTER, HH-53H PAVE LOW JOINT STARS TARGET RADAR SYSTEM |
| AASB |
FASTENER LENGTH |
1.285 INCHES MINIMUM AND 1.305 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.550 INCHES MINIMUM AND 0.585 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
ERR-090 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
14000 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| AAZE |
SHANK DIAMETER |
0.4047 INCHES MINIMUM AND 0.4057 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CQSX |
SHEAR STRENGTH |
24600 DOUBLE POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
0.031 0VERSIZED. |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.1582 INCHES MINIMUM AND 0.1617 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
73197-HL220 MANUFACTURERS STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TYPE II, CLASS 2. FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
