| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| AASB |
FASTENER LENGTH |
0.920 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.4366 INCHES MINIMUM AND 0.4416 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH COUNTERSUNK |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
3700 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| AAZE |
SHANK DIAMETER |
0.2953 INCHES MINIMUM AND 0.2963 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CQSX |
SHEAR STRENGTH |
13100 DOUBLE POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
3/64 OVERSIZE SHANK, FOR REPAIR WORK ONLY. |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
73197-HL203 MANUFACTURERS STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
