| MRC |
Requirement Statement |
Characteristics |
| ABAF |
EXPANSION DEVICE |
THREADED STEM |
| AASB |
FASTENER LENGTH |
0.662 INCHES NOMINAL |
| ANEE |
GRIP LENGTH |
0.282 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.096 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| MATT |
MATERIAL |
STEEL COMP 304 SLEEVE OR STEEL COMP 303SE SLEEVE OR IRON ALLOY 660 SLEEVE |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R56400 BOLT |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R56400 NUT |
| CQBC |
MINIMUM TENSILE STRENGTH |
900 POUNDS PER SQUARE INCH |
| ABAJ |
LUBRICATION |
CARBO WAX OR CETYL ALCOHOL OR PARAFFIN WAX |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS4928 ASSN STD SINGLE MATERIAL RESPONSE BOLT OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE BOLT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS4928 ASSN STD SINGLE MATERIAL RESPONSE NUT OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5639 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE OR AMS5641 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE OR AMS5731 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR AMS5732 ASSN STD 2ND MATERIAL RESPONSE SLEEVE OR AMS5737 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.1625 INCHES MINIMUM AND 0.1645 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| CQSX |
SHEAR STRENGTH |
3150 DOUBLE POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
POWDER BLAST TOP OF NUT HEAD. |
| ASDB |
WIDTH ACROSS FLATS |
0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
1W025-03A054 MANUFACTURERS STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE SLEEVE |
