| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| AASB |
FASTENER LENGTH |
2.177 INCHES MINIMUM AND 2.197 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.870 INCHES MINIMUM AND 1.880 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.3256 INCHES MINIMUM AND 0.3304 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH COUNTERSUNK |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R56400 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
2180 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.164 INCHES |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAZE |
SHANK DIAMETER |
0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CQSX |
SHEAR STRENGTH |
4010 DOUBLE POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
5 MUST BE INSTALLED USING A TORQUE CONTROLLED HEX KEY. |
| THSD |
THREAD SERIES DESIGNATOR |
UNJC |
| AATB |
WIDTH BETWEEN FLATS |
0.0635 INCHES MINIMUM AND 0.0645 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
73197-HL13 MANUFACTURERS STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
HI-SHEAR SPEC. 294, CAGE 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
ALUMINUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
