| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
T-38A ACFT |
| ABAF |
EXPANSION DEVICE |
THREADED STEM |
| AASB |
FASTENER LENGTH |
1.166 INCHES NOMINAL |
| ANEE |
GRIP LENGTH |
0.407 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM OVERALL AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.077 INCHES NOMINAL |
| AAZG |
HEAD MAJOR DIAMETER |
0.342 INCHES MINIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE BODY OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE BODY OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE BODY |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE STEM OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE STEM OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE SLEEVE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE SLEEVE OR AMS 5639 ASSN STD 2ND MATERIAL RESPONSE SLEEVE OR AMS 5641 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 303 SLEEVE OR STEEL COMP 304 SLEEVE OR STEEL COMP 303F SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4130 BODY OR STEEL COMP 4140 BODY OR STEEL COMP 8740 BODY |
| MATT |
MATERIAL |
STEEL COMP 4130 STEM OR STEEL COMP 4140 STEM OR STEEL COMP 8740 STEM |
| CQBC |
MINIMUM TENSILE STRENGTH |
1400 POUNDS PER SQUARE INCH |
| ABAJ |
LUBRICATION |
GREASE FILM |
| AAZE |
SHANK DIAMETER |
0.202 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| CQSX |
SHEAR STRENGTH |
5240 DOUBLE POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
ORIGINAL NAME-FASTENER |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL2 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| SFTT |
SURFACE TREATMENT |
CADMIUM BODY |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
