| MRC |
Requirement Statement |
Characteristics |
| ANEE |
GRIP LENGTH |
0.558 INCHES NOMINAL |
| AASU |
HEAD HEIGHT |
0.332 INCHES NOMINAL |
| HEAT |
HEAT TREATMENT |
ANNEALED SLEEVE |
| AASK |
HEAD STYLE |
HEXAGON |
| MATT |
MATERIAL |
IRON ALLOY 660 BOLT |
| MATT |
MATERIAL |
STEEL COMP 304 SLEEVE |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R56400 NUT |
| CQBC |
MINIMUM TENSILE STRENGTH |
2100 POUNDS PER SQUARE INCH |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
RIVET, BLIND-PROTRUDING HEAD, TITANIUM |
| ABAJ |
LUBRICATION |
DRY FILM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5732 FED STD SINGLE MATERIAL RESPONSE OR AMS5731 FED STD SINGLE MATERIAL RESPONSE OR AMS5737 FED STD SINGLE MATERIAL RESPONSE BOLT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5639 FED STD SINGLE MATERIAL RESPONSE SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS-T-9047 FED STD SINGLE MATERIAL RESPONSE OR AMS4928 FED STD SINGLE MATERIAL RESPONSE OR AMS4967 FED STD SINGLE MATERIAL RESPONSE NUT |
| AAZE |
SHANK DIAMETER |
0.2585 INCHES NOMINAL |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| CQSX |
SHEAR STRENGTH |
7900 DOUBLE POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
DRIVENUT IS BROWN DRY FILM LUBRICANT PROHIBITED ON EXPOSED PAINTABLE SURFACES OF THE NUT HEAD |
| ASDB |
WIDTH ACROSS FLATS |
0.375 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2486 FED STD SINGLE TREATMENT RESPONSE NUT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS-QQ-P-35 FED STD SINGLE TREATMENT RESPONSE BOLT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS-QQ-P-35 FED STD SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE BOLT |
| SFTT |
SURFACE TREATMENT |
PASSIVATE SLEEVE |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE NUT |
