| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.405 INCHES NOMINAL |
| ANEE |
GRIP LENGTH |
0.219 INCHES MINIMUM AND 0.282 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM |
| CQFM |
HARDNESS RATING |
326.0 KNOOP MINIMUM AND 466.0 KNOOP MAXIMUM SLEEVE |
| AAZG |
HEAD MAJOR DIAMETER |
0.333 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| AGAV |
III END ITEM IDENTIFICATION |
MORTER, M-29 |
| MATT |
MATERIAL |
ALUMINUM ALLOY STEM |
| MATT |
MATERIAL |
STEEL COMP 1010 OR STEEL COMP 1020 OR STEEL COMP 1144 OR STEEL COMP 4037 OR STEEL COMP 4130 MECHANICAL LOCK |
| MATT |
MATERIAL |
STEEL SLEEVE |
| CQBC |
MINIMUM TENSILE STRENGTH |
1350 POUNDS PER SQUARE INCH |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
FASTENER, BLIND, HIGH STRENGHT, PULL TYPE, POSITIVE MECHANICAL LOCK, 100 DEGREE FLUSH HEAD, ALLOY STEEL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5690,TYPE316 ASSN STD SINGLE MATERIAL RESPONSE MECHANICAL LOCK |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM-A-331 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTMA331 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| AAZE |
SHANK DIAMETER |
0.162 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQSX |
SHEAR STRENGTH |
2340 SINGLE POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
F16 AIRCRAFT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE1,CLASS3 FED SPEC SINGLE TREATMENT RESPONSE AND MIL-F-81177 MIL SPEC SINGLE TREATMENT RESPONSE STEM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE2,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE MECHANICAL LOCK |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE2,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM OR ALUMINUM SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM OR PASSIVATE OR ALUMINUM ALLOY MECHANICAL LOCK |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
