| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
HERCULES C-130 AIRCRAFT |
| AASB |
FASTENER LENGTH |
0.625 INCHES NOMINAL |
| ANEE |
GRIP LENGTH |
0.308 INCHES MINIMUM AND 0.323 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.037 INCHES MINIMUM AND 0.047 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.242 INCHES MINIMUM AND 0.262 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
ERR-090 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.164 INCHES |
| AAZE |
SHANK DIAMETER |
0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
PROTRUDING SHEAR HEAD ALLOY STEEL 1/16TH GRIP VARIATION |
| FEAT |
SPECIAL FEATURES |
END ITEM HC130N NVIS THREADED END CHAMFER 1/32 IN BY 45 DEGREES HEAT TREAT 108,000 TO 120,000 PSI SHEAR PER MIL-H-6875 FINISH WITH CADMIUM AND CETYL ALCOHOL LUBE PER HI-SHEAR SPEC 305 |
| THSD |
THREAD SERIES DESIGNATOR |
UNJC |
| AATB |
WIDTH BETWEEN FLATS |
0.079 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE2,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
P0.157 |
