| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| HLT631YC-8-6 | HUCK INTERNATIONAL, INC. | 17446 | C | 1 | 5 | AC | |||
| HLT631YB-8-6 | HUCK INTERNATIONAL, INC. | K5673 | C | 1 | 5 | AC | |||
| HLT631YC-8-6 | HUCK INTERNATIONAL, INC. | K5673 | C | 1 | 5 | AC | |||
| HLT631YC-8-6 | HUCK INTERNATIONAL, INC. | 0PTK6 | C | 1 | 5 | AC | |||
| HLT631YC-8-6 | HUCK INTERNATIONAL, INC. | 60516 | C | 1 | 5 | AC | |||
| HLT631YC-8-6 | HUCK INTERNATIONAL, INC. | 56878 | C | 1 | 5 | AC | |||
| HLT631YC-8-6 | HUCK INTERNATIONAL, INC. | 73197 | C | 1 | 5 | AC | |||
| HLT631YC-8-6 | HUCK INTERNATIONAL, INC. | 92215 | C | 1 | 5 | AC | |||
| HLT631YB-8-6 | HUCK INTERNATIONAL, INC. | 6725 | 5 | 2 | 5 | ||||
| HP4758D4-6 | HUCK INTERNATIONAL, INC. | 0ZC92 | 5 | 2 | 5 | ||||
| HLT631YB-8-6 | HUCK INTERNATIONAL, INC. | 17446 | 5 | 2 | 5 | ||||
| HLT631YB-8-6 | HUCK INTERNATIONAL, INC. | 60516 | 5 | 2 | 5 | ||||
| HLT631YB-8-6 | HUCK INTERNATIONAL, INC. | 92215 | 5 | 2 | 5 | ||||
| HLT631YB-8-6 | HUCK INTERNATIONAL, INC. | 0ZC92 | 5 | 2 | 5 | ||||
| HLT631YB-8-6 | HUCK INTERNATIONAL, INC. | 73197 | 3 | 2 | 5 | ||||
| HLT631YB-8-6 | HUCK INTERNATIONAL, INC. | L4528 | 3 | 2 | 5 | ||||
| ST3M758D4-6 | HUCK INTERNATIONAL, INC. | 76301 | 7 | 2 | 5 | ||||
| HLT631YB-8-6 | HUCK INTERNATIONAL, INC. | 56878 | 5 | 9 | 5 | ||||
| HLT631YB-8-6 | HUCK INTERNATIONAL, INC. | 0PTK6 | 5 | 9 | 5 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| AASB | FASTENER LENGTH | 0.780 INCHES MINIMUM AND 0.800 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.3898 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAZE | SHANK DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AATB | WIDTH BETWEEN FLATS | 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
