| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
AIRCRAFT, B-1B CMUP BLK |
| AASB |
FASTENER LENGTH |
0.638 INCHES NOMINAL |
| ANEE |
GRIP LENGTH |
0.313 INCHES NOMINAL |
| AASU |
HEAD HEIGHT |
0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.357 INCHES MINIMUM AND 0.377 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
ERR-090 |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R56400 OVERALL |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAZE |
SHANK DIAMETER |
0.202 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
PROTRUDING TENSION HEAD,TITANIUM, PIN-RIVET THREADED |
| FEAT |
SPECIAL FEATURES |
5DIMENTIONS ARE MET AFTER FINISHING SURFACE TEXTURE PER ANSI B46.1 HOLE PREPARATION PER NAS 618 RECCOMENDED COLLARS HL75DU, HL75V, HL87DU, HL198, HL198V, HL198SY, AND HL280SY HEAT TREAT TO 160,000 PSI TENSTILE MINIMUM AND 95,000 PSI SHEAR MINIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
