| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
F/A-18 HORNET CBR ECP-904 |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.325 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.282 INCHES MINIMUM AND 0.292 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5056 SLEEVE |
| MATT |
MATERIAL |
IRON ALLOY 660 LOCKING RING OR STEEL COMP 304 LOCKING RING |
| MATT |
MATERIAL |
STEEL COMP 632 STEM OR IRON ALLOY 660 STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5657 ASSN STD 1ST MATERIAL RESPONSE STEM OR AMS 5737 ASSN STD 2ND MATERIAL RESPONSE STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5731 ASSN STD 1ST MATERIAL RESPONSE LOCKING RING OR AMS5639 ASSN STD 2ND MATERIAL RESPONSE LOCKING RING |
| AAZE |
SHANK DIAMETER |
0.156 INCHES NOMINAL |
| AAZF |
|
|
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE LOCKING RING |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE STEM OR QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM OR PASSIVATE STEM |
| SFTT |
SURFACE TREATMENT |
CHROMATE SLEEVE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE LOCKING RING |
