| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| HLT969DL-10-17 | SPS TECHNOLOGIES LLC | 6725 | 3 | 2 | 5 | ||||
| HLT969TB-10-17 | SPS TECHNOLOGIES LLC | 6725 | 3 | 2 | 5 | ||||
| HLT969DL-10-17 | SPS TECHNOLOGIES LLC | 17446 | 3 | 2 | 5 | ||||
| ST3M758T5-17 | SPS TECHNOLOGIES LLC | 76301 | 3 | 2 | 5 | ||||
| AIC-L-768-10-17 | SPS TECHNOLOGIES LLC | 6725 | 5 | 2 | 5 | ||||
| HLT969TB-10-17 | SPS TECHNOLOGIES LLC | 17446 | 5 | 2 | 5 | ||||
| HLT969TB-10-17 | SPS TECHNOLOGIES LLC | 56878 | 5 | 2 | 5 | ||||
| HLT969TB-10-17 | SPS TECHNOLOGIES LLC | 60516 | 5 | 2 | 5 | ||||
| HLT969DL-10-17 | SPS TECHNOLOGIES LLC | 60516 | 5 | 2 | 5 | ||||
| HLT969TB-10-17 | SPS TECHNOLOGIES LLC | 73197 | 5 | 2 | 5 | ||||
| HLT969TB-10-17 | SPS TECHNOLOGIES LLC | K5673 | 5 | 2 | 5 | ||||
| HLT969DL-10-17 | SPS TECHNOLOGIES LLC | K5673 | 5 | 2 | 5 | ||||
| HLT969TB-10-17 | SPS TECHNOLOGIES LLC | L4528 | 5 | 2 | 5 | ||||
| HLT969DL-10-17 | SPS TECHNOLOGIES LLC | 56878 | 3 | 2 | 5 | ||||
| HLT969DL-10-17 | SPS TECHNOLOGIES LLC | 73197 | 3 | 2 | 5 | ||||
| HLT969DL-10-17 | SPS TECHNOLOGIES LLC | 92215 | 3 | 2 | 5 | ||||
| HLT969TB-10-17 | SPS TECHNOLOGIES LLC | 92215 | 3 | 2 | 5 | ||||
| HLT969DL-10-17 | SPS TECHNOLOGIES LLC | L4528 | 3 | 2 | 5 | ||||
| HLT969TB-10-17 | SPS TECHNOLOGIES LLC | 0PTK6 | 5 | 9 | 5 | ||||
| HLT969DL-10-17 | SPS TECHNOLOGIES LLC | 0PTK6 | 5 | 9 | 5 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |
| AASB | FASTENER LENGTH | 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| MATT | MATERIAL | TITANIUM ALLOY OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAZE | SHANK DIAMETER | 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AATB | WIDTH BETWEEN FLATS | 0.127 INCHES MINIMUM AND 0.129 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 24 |
