| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
A-10 |
| AASB |
FASTENER LENGTH |
2.698 INCHES MINIMUM AND 2.718 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.933 INCHES MINIMUM AND 1.943 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.870 INCHES MINIMUM AND 0.905 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
ERR-090 |
| MATT |
MATERIAL |
STEEL COMP 8740 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 4340 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.5625 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS-S-6049 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 6349 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 6382 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 6415 ASSN STD SINGLE MATERIAL RES |
| AAZE |
SHANK DIAMETER |
0.5917 INCHES MINIMUM AND 0.5927 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CQSX |
SHEAR STRENGTH |
52400 DOUBLE POUNDS PER SQUARE INCH |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
HY-LOK |
| FEAT |
SPECIAL FEATURES |
NON-LUBED PINS MUST BE USED WITH WET SEALANT OR LUBED COLLARS |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.306 INCHES MINIMUM AND 0.326 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS-QQ-P-416,TYPE II,CLASS 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
