| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
A-10 |
| AASB |
FASTENER LENGTH |
2.563 INCHES MINIMUM AND 2.583 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.933 INCHES MINIMUM AND 1.943 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.615 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
ERR-090 |
| MATT |
MATERIAL |
STEEL COMP 8740 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 4340 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.4375 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS-S-6049 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 6349 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 6382 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 6415 ASSN STD SINGLE MATERIAL RES |
| AAZE |
SHANK DIAMETER |
0.4672 INCHES MINIMUM AND 0.4682 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CQSX |
SHEAR STRENGTH |
32700 DOUBLE POUNDS PER SQUARE INCH |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
HY-LOK |
| FEAT |
SPECIAL FEATURES |
NON-LUBED PINS MUST BE USED WITH WET SEALANT OR LUBED COLLARS |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.233 INCHES MINIMUM AND 0.253 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS-QQ-P-416,TYPE II,CLASS 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
