| MRC |
Requirement Statement |
Characteristics |
| ABCJ |
COLLAR INSIDE DIAMETER |
0.166 INCHES MINIMUM AND 0.173 INCHES MAXIMUM |
| ABAA |
COLLAR OUTSIDE DIAMETER |
0.303 INCHES MINIMUM AND 0.307 INCHES MAXIMUM |
| ABAB |
COLLAR OVERALL HEIGHT |
0.477 INCHES NOMINAL |
| CWBJ |
COLLAR STYLE |
THREADED BREAK OFF TYPE |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| ANEE |
GRIP LENGTH |
0.187 INCHES NOMINAL |
| AAZG |
HEAD MAJOR DIAMETER |
0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH COUNTERSUNK |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE BODY OR MIL-S-5656 MIL SPEC SINGLE MATERIAL RESPONSE BODY OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE WASHER OR QQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE WASHER OR QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE WASHER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE COLLAR OR QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE COLLAR |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 COLLAR |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 WASHER OR ALUMINUM ALLOY 2024 WASHER |
| MATT |
MATERIAL |
STEEL COMP E4340 BODY OR STEEL COMP 4140 BODY OR STEEL COMP 8740 BODY |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| AAZE |
SHANK DIAMETER |
0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CQSX |
SHEAR STRENGTH |
95000 SINGLE POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE COLLAR |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE WASHER |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| SFTT |
SURFACE TREATMENT |
ANODIZE COLLAR |
| SFTT |
SURFACE TREATMENT |
ANODIZE WASHER |
| SFTT |
SURFACE TREATMENT |
CADMIUM BODY AND CHROMATE BODY |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
