| MRC |
Requirement Statement |
Characteristics |
| AAZP |
CHAMFER LENGTH |
0.03125 INCHES NOMINAL |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| AASB |
FASTENER LENGTH |
1.0725 INCHES MINIMUM AND 1.0925 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.6825 INCHES MINIMUM AND 0.6925 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.0993 INCHES MINIMUM AND 0.1013 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.5018 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH COUNTERSUNK |
| MATT |
MATERIAL |
IRON ALLOY 660 OVERALL |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
A-286 HIGH TEMP ALLOY PER AMS5737 OR AMS5731 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| AAZE |
SHANK DIAMETER |
0.2646 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CQSX |
SHEAR STRENGTH |
10490 DOUBLE POUNDS PER SQUARE INCH |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
100 DEG FLUSH MS24694 TENSION HEAD A-286 HIGH TEMPERATURE ALLOY 1/16 GRIP VARIATION-1/64 OVERSIZE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
PASSIVATE PER HI-SHEER SPEC.258 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
