| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
1520-01-475-5179 |
| ABCJ |
COLLAR INSIDE DIAMETER |
0.268 INCHES MINIMUM AND 0.272 INCHES MAXIMUM |
| ABAA |
COLLAR OUTSIDE DIAMETER |
0.408 INCHES MINIMUM AND 0.412 INCHES MAXIMUM |
| ABAB |
COLLAR OVERALL HEIGHT |
0.532 INCHES MINIMUM AND 0.552 INCHES MAXIMUM |
| CWBJ |
COLLAR STYLE |
THREADED BREAK OFF TYPE |
| CRSQ |
COUNTERSINK ANGLE |
90.0 DEGREES NOMINAL |
| AASB |
FASTENER LENGTH |
1.0725 INCHES MINIMUM AND 1.0925 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.6825 INCHES MINIMUM AND 0.6925 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.077 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.415 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
COUNTERSUNK W/REVERSE CHAMFER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
STAINLESS STEEL PER AMS5640 NATIONAL SPEC SINGLE MATERIAL RESPONSE COLLAR |
| MATT |
MATERIAL |
STEEL BOLT |
| MATT |
MATERIAL |
STEEL COMP 303 COLLAR |
| CQJX |
NOMINAL THREAD SIZE |
0.25 INCHES |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ALLOY STEEL PER AMS6415,AMS6349 OR AMS-S-6049 NATIONAL SPEC SINGLE MATERIAL RESPONSE BOLT |
| AAZE |
SHANK DIAMETER |
0.2641 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CQSX |
SHEAR STRENGTH |
10490 DOUBLE POUNDS PER SQUARE INCH |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
PROTRUDING TENSION HEAD ALLOY STEEL,1/64 OVERSIZE 1/16 GRIP VARIATION HI-LOK PIN ANC COLLAR ASSEMBLY |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| ASDB |
WIDTH ACROSS FLATS |
0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM |
| AATB |
WIDTH BETWEEN FLATS |
0.122 INCHES MINIMUM AND 0.142 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
