| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
NG NAV SYSTEM |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| ANEE |
GRIP LENGTH |
0.3075 INCHES MINIMUM AND 0.3175 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.376 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH COUNTERSUNK |
| MATT |
MATERIAL |
NICKEL ALLOY 718 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
4350 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.1900 INCHES |
| ABAJ |
LUBRICATION |
SOLID FILM AND CETYL ALCOHOL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5662 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAZE |
SHANK DIAMETER |
0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, TAPERED, THREADED |
| CQSX |
SHEAR STRENGTH |
7060 DOUBLE POUNDS PER SQUARE INCH |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
PIN,THREADED,HEX POINT DRIVE |
| FEAT |
SPECIAL FEATURES |
SOLID FILM LUBRICANT PER MIL-L-46010 KAL-GARD TYPE FA OR HI-KOTE 2 ONLY AND CETYL ALCOHOL LUBE HEX DRIVE POINT IS .0791/.0801 WIDTH ACROSS FLATS,.080/.100 DEEP .104/.119 DIA |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AAZU |
TIP DIAMETER |
0.181 INCHES MINIMUM AND 0.184 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
1W025-03A063 MANUFACTURERS STANDARD |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
