| MRC |
Requirement Statement |
Characteristics |
| AAZP |
CHAMFER LENGTH |
0.047 INCHES NOMINAL |
| CRSQ |
COUNTERSINK ANGLE |
90.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| AAZJ |
COUNTERSINK HEIGHT |
0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.592 INCHES MINIMUM AND 0.627 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH COUNTERSUNK |
| AAZQ |
HOLE DEPTH |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
18900 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS6415 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6349 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5626 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAZE |
SHANK DIAMETER |
0.436 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CQSX |
SHEAR STRENGTH |
28600 DOUBLE POUNDS PER SQUARE INCH |
| AAZT |
SLOT DEPTH |
0.315 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
HI-LOK PIN PROTRUDING TENSION HEAD |
| CTTC |
THREAD TOLERANCE CLASS |
3A EXTERNAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
