| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
AN/APG-82(V)( |
| CRSQ |
COUNTERSINK ANGLE |
90.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.102 INCHES MINIMUM AND 0.112 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.475 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
COUNTERSUNK W/REVERSE CHAMFER |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R56400 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.312 INCHES |
| AAZE |
SHANK DIAMETER |
0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
PIN,RIVET,THREADED,TENSION PROTRUDING HEAD,HEX POINT DRIVE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.127 INCHES MINIMUM AND 0.129 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
