| MRC |
Requirement Statement |
Characteristics |
| ANYN |
ELONGATION PERCENTAGE |
300 MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
MOTOR HOVERIN LOS ANGLES CLASS SSN (688) |
| ADUF |
APERTURE LENGTH |
5.400 INCHES NOMINAL |
| ADUE |
APERTURE WIDTH |
5.000 INCHES NOMINAL |
| AECS |
BOLT HOLE QUANTITY |
4 |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
4.500 INCHES NOMINAL |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
4.900 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
SOLID SINGLE OR COMPOSITION |
| ADVM |
CROSS-SECTIONAL THICKNESS |
0.125 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.169 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-2765 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.250 INCHES NOMINAL |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.250 INCHES NOMINAL |
| CTSC |
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH |
0.500 INCHES NOMINAL |
| CTRH |
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH |
0.500 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
5.900 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
5.500 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR |
