| MRC |
Requirement Statement |
Characteristics |
| ADUF |
APERTURE LENGTH |
42.500 INCHES NOMINAL |
| ADUE |
APERTURE WIDTH |
9.500 INCHES NOMINAL |
| AECS |
BOLT HOLE QUANTITY |
54 |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
2.200 INCHES NOMINAL |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
2.000 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
SOLID SINGLE OR COMPOSITION |
| ADVM |
CROSS-SECTIONAL THICKNESS |
0.062 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
PREHEATER |
| AAUB |
HOLE DIAMETER |
0.582 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
THERMO-TORK,TN9001 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
RUBBER BUTADIENE NITRILE OVERALL AND PLASTIC POLYAMIDE OVERALL |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.750 INCHES NOMINAL |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.750 INCHES NOMINAL |
| CTSC |
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH |
1.500 INCHES NOMINAL |
| CTRH |
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH |
1.500 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
45.500 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
12.500 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
APERTURE IS DIVIDED BY A 1 INCH STRIPE ALONG THE LENGTH CENTEREDON THE WIDTH CONTAINING 21 .438 IN. DIA. HOLES EQUALLY SPACED AT 2 INCHES HIGH TEMP RATING UP TO 750 DEGREES F |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR |
