| MRC |
Requirement Statement |
Characteristics |
| ADUF |
APERTURE LENGTH |
5.98 INCHES MINIMUM AND 6.02 INCHES MAXIMUM |
| ADUE |
APERTURE WIDTH |
3.98 INCHES MINIMUM AND 4.02 INCHES MAXIMUM |
| AECS |
BOLT HOLE QUANTITY |
6 |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
4.48 INCHES MINIMUM AND 4.52 INCHES MAXIMUM |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
3.23 INCHES MINIMUM AND 3.27 INCHES MAXIMUM |
| HUES |
COLOR |
RED |
| CQFM |
HARDNESS RATING |
50.0 SHORE DUROMETER A NOMINAL OVERALL |
| AAUB |
HOLE DIAMETER |
0.23 INCHES MINIMUM AND 0.27 INCHES MAXIMUM |
| MATT |
MATERIAL |
SILICONE OVERALL |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.23 INCHES MINIMUM AND 0.27 INCHES MAXIMUM |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.23 INCHES MINIMUM AND 0.27 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
6.98 INCHES MINIMUM AND 7.02 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
4.98 INCHES MINIMUM AND 5.02 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
GASKET, ACCESS POWER TERMINAL, EG |
| FEAT |
SPECIAL FEATURES |
MATERIAL IS LISTED AS 1/32 50 DUROMETER SHORE A RED SPECIFICATION GRADE SILICONE WITH ACRYLIC PSA. |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR |
