| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.250 INCHES NOMINAL |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.250 INCHES NOMINAL |
| ADPR |
BODY THICKNESS |
0.063 INCHES NOMINAL |
| ADNU |
CORNER RADIUS |
0.250 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
FLAT |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
0.875 INCHES NOMINAL |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
1.125 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
2 |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
4 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ABRY |
LENGTH |
2.250 INCHES NOMINAL |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| FEAT |
SPECIAL FEATURES |
0.500 IN. DIA HOLE LOCATED ON CENTER OF COVER FOR SHAFT |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| ABGL |
WIDTH |
1.625 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM |
