| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.252 INCHES NOMINAL |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.218 INCHES NOMINAL |
| ADPR |
BODY THICKNESS |
0.060 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECESS, SAME SHAPE AS THE PERIPHERY |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
0.450 INCHES NOMINAL AND 1.237 INCHES NOMINAL AND 1.687 INCHES NOMINAL AND 1.688 INCHES NOMINAL AND 0.075 INCHES NOMINAL AND 0.644 INCHES NOMINAL |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
0.469 INCHES NOMINAL AND 1.104 INCHES NOMINAL AND 0.062 INCHES NOMINAL AND 1.219 INCHES NOMINAL AND 0.468 INCHES NOMINAL |
| ADPN |
FIRST RECESS INSIDE HEIGHT |
0.546 INCHES NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.100 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.169 INCHES NOMINAL AND 0.196 INCHES NOMINAL |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
10 |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
11 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 T6 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ABRY |
LENGTH |
6.180 INCHES NOMINAL |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| FEAT |
SPECIAL FEATURES |
FOUR EARS 3.375 BY 4.687 IN. CENTER TO CENTER HOLES 0.169 IN. DIA,COUNTERSINK 0.284 IN. DIA TO 100 DEGREES |
| ABGL |
WIDTH |
3.880 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
