| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
1.100 INCHES MINIMUM AND 1.160 INCHES MAXIMUM |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.475 INCHES MINIMUM AND 0.525 INCHES MAXIMUM |
| ADPR |
BODY THICKNESS |
0.500 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| ADNU |
CORNER RADIUS |
0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
FLAT |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
2.000 INCHES NOMINAL |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
1.750 INCHES NOMINAL |
| ADPA |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH |
0.250 INCHES NOMINAL |
| ADPB |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH |
0.870 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.210 INCHES MINIMUM AND 0.218 INCHES MAXIMUM |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
10 |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
6 |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ABRY |
LENGTH |
8.950 INCHES MINIMUM AND 9.050 INCHES MAXIMUM |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| ABGL |
WIDTH |
5.730 INCHES MINIMUM AND 5.790 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TY 1,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
