| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.560 INCHES NOMINAL |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.560 INCHES NOMINAL |
| ADPR |
BODY THICKNESS |
0.380 INCHES NOMINAL |
| ADNU |
CORNER RADIUS |
0.250 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
SQUARE OR RECTANGULAR RECESS |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
4.000 INCHES NOMINAL AND 4.000 INCHES NOMINAL AND 3.620 INCHES NOMINAL AND 4.000 INCHES NOMINAL AND 4.000 INCHES NOMINAL |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
4.000 INCHES NOMINAL AND 4.620 INCHES NOMINAL AND 4.630 INCHES NOMINAL AND 4.000 INCHES NOMINAL |
| ADPN |
FIRST RECESS INSIDE HEIGHT |
7.300 INCHES NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.750 INCHES NOMINAL |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
10 |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
8 |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| CWCJ |
INSIDE ANGLE |
3.0 DEGREES NOMINAL |
| ADJU |
INSIDE LENGTH |
15.880 INCHES NOMINAL |
| ADJT |
INSIDE WIDTH |
18.250 INCHES NOMINAL |
| ABRY |
LENGTH |
20.750 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
00-A-601,ALLOY 356-T-7 FED SPEC SINGLE MATERIAL RESPONSE |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, ROUNDED CORNERS, MULTI HOLES |
| ABGL |
WIDTH |
18.380 INCHES NOMINAL |
