| MRC |
Requirement Statement |
Characteristics |
| CRMK |
ANGLE |
90.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.187 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.750 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.201 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.250 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.250 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| ABPX |
MATERIAL THICKNESS |
0.060 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 302 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.250 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.201 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.250 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
TRIANGLE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
