| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.408 INCHES NOMINAL |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.320 INCHES NOMINAL |
| ADPR |
BODY THICKNESS |
0.063 INCHES NOMINAL |
| ADPK |
CORNER HOLE CENTERLINE RADIUS |
0.083 INCHES NOMINAL |
| ADNU |
CORNER RADIUS |
0.190 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
SQUARE OR RECTANGULAR RECESS |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
2.505 INCHES NOMINAL |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
2.105 INCHES NOMINAL |
| ADPA |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH |
2.588 INCHES NOMINAL |
| ADPB |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH |
2.188 INCHES NOMINAL |
| ADPN |
FIRST RECESS INSIDE HEIGHT |
0.490 INCHES MINIMUM AND 1.060 INCHES MAXIMUM |
| ABKU |
FLANGE THICKNESS |
0.063 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
RADAR EQUIPMENT,AIRBORNE |
| AAUB |
HOLE DIAMETER |
0.166 INCHES NOMINAL |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
2 |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
4 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11,TEMPER 0 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ADPQ |
INSIDE CORNER RADIUS |
0.250 INCHES NOMINAL |
| ADJU |
INSIDE LENGTH |
1.060 INCHES NOMINAL |
| ADJT |
INSIDE WIDTH |
2.440 INCHES NOMINAL |
| ABRY |
LENGTH |
5.600 INCHES NOMINAL |
| ADQB |
SECURING DEVICE TYPE |
SPECIAL |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| ABGL |
WIDTH |
3.700 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
F-50,TYPE 1,CLASS 3 MFR REF 1ST TREATMENT RESPONSE AND FED-STD-595,TYPE 2,CLASS 3,GRADE A2 FED STD 2ND TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ENAMEL AND PRIMER EPOXY-POLYAMIDE |
