| MRC |
Requirement Statement |
Characteristics |
| CRMK |
ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.281 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.375 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.688 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.750 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
3 |
| ABPX |
MATERIAL THICKNESS |
0.250 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
TURNED EDGE ONE SIDE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.250 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.281 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.688 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| SFTT |
SURFACE TREATMENT |
ENAMEL LUSTERLESS |
