| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
1.145 INCHES MINIMUM AND 1.155 INCHES MAXIMUM |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
1.025 INCHES MINIMUM AND 1.135 INCHES MAXIMUM |
| ADNU |
CORNER RADIUS |
0.250 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
SQUARE OR RECTANGULAR RECESS |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
1.295 INCHES MINIMUM AND 1.305 INCHES MAXIMUM |
| ADPA |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH |
0.775 INCHES MINIMUM AND 0.785 INCHES MAXIMUM |
| ADPB |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH |
0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
12 |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
12 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ADPQ |
INSIDE CORNER RADIUS |
0.400 INCHES NOMINAL |
| ABRY |
LENGTH |
9.030 INCHES NOMINAL |
| ADQB |
SECURING DEVICE TYPE |
TURNLOCK FASTENER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| ABGL |
WIDTH |
8.560 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541, TYPE 2, GRADE C, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
