| MRC |
Requirement Statement |
Characteristics |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
2.374 INCHES NOMINAL |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
2.062 INCHES NOMINAL |
| ADPR |
BODY THICKNESS |
0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| ADNU |
CORNER RADIUS |
1.000 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
FLAT |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
4.188 INCHES NOMINAL |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
5.437 INCHES NOMINAL |
| ADPA |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH |
6.250 INCHES NOMINAL |
| ADPB |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH |
0.312 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.219 INCHES MINIMUM AND 0.233 INCHES MAXIMUM |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
6 |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
8 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ABRY |
LENGTH |
17.250 INCHES NOMINAL |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| FEAT |
SPECIAL FEATURES |
9.250 IN. LG BRACKET WELDED ON ONE SIDE |
| ABGL |
WIDTH |
11.500 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
TT-P-664 FED SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ENAMEL |
