| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM |
| ADPR |
BODY THICKNESS |
0.375 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
SQUARE OR RECTANGULAR RECESS |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
6.802 INCHES MINIMUM AND 6.822 INCHES MAXIMUM |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
5.615 INCHES MINIMUM AND 5.635 INCHES MAXIMUM |
| ADPN |
FIRST RECESS INSIDE HEIGHT |
2.340 INCHES MINIMUM AND 2.540 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.246 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
2 |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
6 |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| CWCJ |
INSIDE ANGLE |
45.0 DEGREES NOMINAL |
| ABRY |
LENGTH |
14.188 INCHES MINIMUM AND 14.313 INCHES MAXIMUM |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| ABGL |
WIDTH |
11.813 INCHES MINIMUM AND 11.938 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
ENAMEL |
