| MRC |
Requirement Statement |
Characteristics |
| AHMK |
DRIVE END OUTSIDE DIAMETER |
0.563 INCHES NOMINAL |
| AJFW |
DRIVE END STYLE |
EXTERNAL |
| AWJY |
DRIVE FACILITY STYLE |
PARALLEL KEYWAYS |
| AWJW |
ARM STYLE |
STRAIGHT |
| AWJT |
COLOR AND LOCATION |
BLACK HANDLE ERR-100 ERR-100 |
| AWJT |
COLOR AND LOCATION |
GRAY ARM ERR-100 ERR-100 |
| AWJT |
COLOR AND LOCATION |
GRAY DRIVE END ERR-100 ERR-100 |
| AWJT |
COLOR AND LOCATION |
GRAY HANDLE PIN ERR-100 ERR-100 |
| AWKA |
CRANK OVERALL LENGTH |
4.329 INCHES MINIMUM AND 4.453 INCHES MAXIMUM |
| AWKG |
CRANK THROW LENGTH |
1.438 INCHES MINIMUM AND 1.562 INCHES MAXIMUM |
| ZZZV |
FSC APPLICATION DATA |
TELETYPE AND FACSIMILE EQUIPMENT |
| AASN |
HANDLE LENGTH |
1.000 INCHES NOMINAL |
| AWKC |
HANDLE MOUNTING METHOD |
BOLT |
| AWKD |
HANDLE ROTATING FEATURE |
INCLUDED |
| ALMP |
HANDLE STYLE |
ROUND |
| AARX |
INSIDE DIAMETER |
0.438 INCHES NOMINAL |
| ABRV |
KEYWAY DEPTH |
0.062 INCHES NOMINAL |
| AEVE |
KEYWAY QUANTITY |
2 |
| ABRR |
KEYWAY WIDTH |
0.106 INCHES MINIMUM AND 0.112 INCHES MAXIMUM |
| AWKM |
LENGTH FROM END TO ARM CENTER |
3.188 INCHES MINIMUM AND 3.312 INCHES MAXIMUM |
| ANNQ |
MATERIAL AND LOCATION |
ALUMINUM ALLOY, QQ-A-225/3, ALLOY 2011, T3 HANDLE ERR-100 ERR-100 |
| ANNQ |
MATERIAL AND LOCATION |
BRASS, ASTM B16 ARM ERR-100 ERR-100 |
| ANNQ |
MATERIAL AND LOCATION |
BRASS, ASTM B16 DRIVE END ERR-100 ERR-100 |
| ANNQ |
MATERIAL AND LOCATION |
BRASS, ASTM B16 HANDLE PIN ERR-100 ERR-100 |
| AWKF |
RATCHET |
NOT INCLUDED |
| ABFY |
OVERALL DEPTH |
0.438 INCHES NOMINAL |
| ANNR |
SURFACE TREATMENT AND LOCATION |
ANODIZED, MIL-F-14072, FINISH E511 HANDLE ERR-100 ERR-100 |
| ANNR |
SURFACE TREATMENT AND LOCATION |
NICKEL, MIL-F-14072 ARM ERR-100 ERR-100 |
| ANNR |
SURFACE TREATMENT AND LOCATION |
NICKEL, MIL-F-14072 DRIVE END ERR-100 ERR-100 |
| ANNR |
SURFACE TREATMENT AND LOCATION |
NICKEL, MIL-F-14072 HANDLE PIN ERR-100 ERR-100 |
