| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| ADPR |
BODY THICKNESS |
0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| ADNU |
CORNER RADIUS |
0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
CIRCULAR RECESS |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
1.876 INCHES NOMINAL |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
1.876 INCHES NOMINAL |
| ADPN |
FIRST RECESS INSIDE HEIGHT |
0.125 INCHES NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| ZZZV |
FSC APPLICATION DATA |
POWER TAKEOFF,ENGINE,ACFT |
| AAUB |
HOLE DIAMETER |
0.279 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| MATT |
MATERIAL |
MAGNESIUM ALLOY AZ63A |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| AARX |
INSIDE DIAMETER |
1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM |
| ABRY |
LENGTH |
2.314 INCHES MINIMUM AND 2.438 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 4424 ASSN STD SINGLE MATERIAL RESPONSE |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, FOUR HOLES |
| FEAT |
SPECIAL FEATURES |
GRAY |
| ABGL |
WIDTH |
2.314 INCHES MINIMUM AND 2.438 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2510 ASSN STD SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PAINT |
