| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.192 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.547 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| ADPR |
BODY THICKNESS |
0.064 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
FLAT |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
2.995 INCHES MINIMUM AND 3.005 INCHES MAXIMUM |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
5.366 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.257 INCHES MINIMUM AND 0.259 INCHES MAXIMUM |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
2 |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
4 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ABRY |
LENGTH |
6.730 INCHES MINIMUM AND 6.750 INCHES MAXIMUM |
| ADQB |
SECURING DEVICE TYPE |
TURNLOCK FASTENER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| ABGL |
WIDTH |
5.730 INCHES MINIMUM AND 5.750 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
