| MRC |
Requirement Statement |
Characteristics |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
2.660 INCHES NOMINAL |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
2.100 INCHES NOMINAL |
| ADPR |
BODY THICKNESS |
0.1275 INCHES NOMINAL |
| ADNU |
CORNER RADIUS |
2.000 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
SQUARE OR RECTANGULAR RECESS |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
3.880 INCHES NOMINAL |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
2.760 INCHES NOMINAL |
| ADPA |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH |
2.180 INCHES NOMINAL |
| ADPB |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH |
0.480 INCHES NOMINAL |
| ADPN |
FIRST RECESS INSIDE HEIGHT |
0.6535 INCHES NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.1275 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.469 INCHES NOMINAL |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
2 |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL COMP 1010 |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ADPQ |
INSIDE CORNER RADIUS |
0.380 INCHES NOMINAL |
| ADJU |
INSIDE LENGTH |
6.535 INCHES NOMINAL |
| ADJT |
INSIDE WIDTH |
4.295 INCHES NOMINAL |
| ABRY |
LENGTH |
9.210 INCHES NOMINAL |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| ABGL |
WIDTH |
6.970 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PAINT |
