| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| ADPR |
BODY THICKNESS |
0.040 INCHES NOMINAL |
| ADNU |
CORNER RADIUS |
0.090 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
FLAT |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
1.406 INCHES NOMINAL |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
1.125 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.196 INCHES MINIMUM AND 0.206 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6721,TYPE 347 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ABRY |
LENGTH |
1.740 INCHES MINIMUM AND 1.780 INCHES MAXIMUM |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, FOUR HOLES |
| FEAT |
SPECIAL FEATURES |
CENTER HOLE 0.120 TO 0.140 IN. DIA,0.863 TO 0.883 IN. HOLE CENTERLINE TO END ALONG LG,0.653 TO 0.683 IN. HOLE CENTERLINE TO END ALONG W |
| ABGL |
WIDTH |
1.370 INCHES MINIMUM AND 1.410 INCHES MAXIMUM |
