| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.562 INCHES NOMINAL |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.192 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| ADPR |
BODY THICKNESS |
0.063 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
FLAT |
| ADPA |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH |
5.360 INCHES MINIMUM AND 5.370 INCHES MAXIMUM |
| ADPB |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH |
0.375 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
FUSELAGE,AIRFRAME ACFT |
| AAUB |
HOLE DIAMETER |
0.384 INCHES MINIMUM AND 0.394 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,T3 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ABRY |
LENGTH |
5.730 INCHES MINIMUM AND 5.750 INCHES MAXIMUM |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, TWO HOLES |
| ABGL |
WIDTH |
1.500 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
LACQUER |
