| MRC |
Requirement Statement |
Characteristics |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
1.620 INCHES MINIMUM AND 1.630 INCHES MAXIMUM |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| ADPR |
BODY THICKNESS |
0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| ADNU |
CORNER RADIUS |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
FLAT |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
2.495 INCHES MINIMUM AND 2.505 INCHES MAXIMUM |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
2.119 INCHES MINIMUM AND 2.129 INCHES MAXIMUM |
| ADPA |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH |
1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| ADPB |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH |
0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.181 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
14 |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
6 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ABRY |
LENGTH |
18.203 INCHES MINIMUM AND 18.234 INCHES MAXIMUM |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| ABGL |
WIDTH |
5.734 INCHES MINIMUM AND 5.766 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TY 1,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
