| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| ADPR |
BODY THICKNESS |
0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| ADNU |
CORNER RADIUS |
0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
FLAT |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
2.120 INCHES MINIMUM AND 2.130 INCHES MAXIMUM |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.236 INCHES MINIMUM AND 0.242 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/1 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 1100 |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ABRY |
LENGTH |
2.474 INCHES MINIMUM AND 2.516 INCHES MAXIMUM |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, FOUR HOLES |
| ABGL |
WIDTH |
1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
T-E-529 FED SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ENAMEL |
