| MRC |
Requirement Statement |
Characteristics |
| CRMK |
ANGLE |
90.0 DEGREES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
15.750 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.375 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
16.125 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.760 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.560 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
18.880 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
18.880 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
ANGLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-698 COMMERCIAL FED SPEC SINGLE MATERIAL RESPONSE |
| ABPX |
MATERIAL THICKNESS |
0.190 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
RIB STIFFENER CENTER SECTION |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.693 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.753 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
12.750 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
3.500 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
20.940 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
ANGLE |
| AHLH |
SECOND LEG END WIDTH |
17.310 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.375 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
20.940 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
TRIANGLE |
