| MRC |
Requirement Statement |
Characteristics |
| AFEC |
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH |
0.190 INCHES NOMINAL |
| CWXN |
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER |
0.625 INCHES NOMINAL |
| CWXC |
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER |
0.250 INCHES NOMINAL |
| BYGG |
BLOCK HEIGHT |
0.312 INCHES NOMINAL |
| CBSM |
CABLE DIAMETER FOR WHICH DESIGNED |
0.250 INCHES NOMINAL THIRD HOLE |
| CBSM |
CABLE DIAMETER FOR WHICH DESIGNED |
0.375 INCHES NOMINAL FIRST HOLE |
| CBSM |
CABLE DIAMETER FOR WHICH DESIGNED |
0.375 INCHES NOMINAL SECOND HOLE |
| CWXZ |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES |
0.629 INCHES NOMINAL |
| AXPC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES |
1.884 INCHES NOMINAL |
| CWYC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES |
1.008 INCHES NOMINAL |
| CWWM |
CLAMPING HOLE DIAMETER |
0.250 INCHES NOMINAL THIRD HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.375 INCHES NOMINAL FIRST HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.375 INCHES NOMINAL SECOND HOLE |
| CWTD |
CLAMPING HOLE QUANTITY |
3 |
| MATT |
MATERIAL |
PLASTIC |
| AZGM |
MOUNTING FACILITY |
UNTHREADED HOLE |
| ABTB |
MOUNTING HOLE DIAMETER |
0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| ABTJ |
MOUNTING HOLE QUANTITY |
2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
GM 4104 BFA,CAGEC 26512 MFR REF SINGLE MATERIAL RESPONSE |
| ABHP |
OVERALL LENGTH |
2.384 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
0.380 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR |
