| MRC |
Requirement Statement |
Characteristics |
| CRMK |
ANGLE |
90.0 DEGREES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.750 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.307 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.522 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.380 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
3.470 INCHES MINIMUM AND 3.530 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
4 |
| ABPX |
MATERIAL THICKNESS |
0.190 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.300 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.620 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.750 NOMINAL INCHES |
| ADLL |
SECOND LEG LENGTH |
4.860 INCHES MINIMUM AND 4.920 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.307 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| SFTT |
SURFACE TREATMENT |
ENAMEL SEMIGLOSS |
