| MRC |
Requirement Statement |
Characteristics |
| CRMK |
ANGLE |
90.0 DEGREES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.625 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
0.190 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.164 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.317 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.180 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.310 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.350 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| ASXK |
HOLE QUANTITY |
4 |
| ABPX |
MATERIAL THICKNESS |
0.125 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
THREADED |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.222 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.180 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.750 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.730 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHLH |
SECOND LEG END WIDTH |
0.190 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.164 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.310 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
0.164 NC 2B 4 THD HOLES |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CADMIUM |
