| MRC |
Requirement Statement |
Characteristics |
| CRMK |
ANGLE |
90.0 DEGREES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
5.990 INCHES MINIMUM AND 6.010 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.250 NOMINAL INCHES |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
7.990 INCHES MINIMUM AND 8.010 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ABPX |
MATERIAL THICKNESS |
0.219 NOMINAL MILS AND 0.281 NOMINAL CENTIMETERS |
| MATT |
MATERIAL |
STEEL COMP 1010 |
| ACHY |
MOUNTING HOLE TYPE |
THREADED |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.219 NOMINAL MILS AND 0.283 NOMINAL CENTIMETERS |
| ADLL |
SECOND LEG LENGTH |
8.844 INCHES MINIMUM AND 8.905 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| AHMA |
SECOND LEG SLOT WIDTH |
0.281 INCHES MINIMUM AND 0.343 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHLF |
SECOND LEG WIDTH |
0.990 NOMINAL MILS AND 1.010 NOMINAL CENTIMETERS |
| FEAT |
SPECIAL FEATURES |
FOR RIGHT FENDER |
| STYL |
STYLE DESIGNATOR |
ANGLE |
